|
Back
Up
Next
| |
A Bibliography on Capacity Modeling for Semiconductor Manufacturing
Section 27: Queueing Models
 | A. Amiri, "The Design Of Service Systems With Queueing Time Cost,
Workload Capacities And Backup Service," European Journal of
Operational Research, Vol. 104, No. 1, 201-217, 1998. |
| R. Billings and J. J. Hasenbein, "Heuristic Methods for Near-Optimal
Wafer Fab Scheduling and Dispatching Using Multiclass Fluid Networks,"
Proceedings of the International Conference on Modeling and Analysis of
Semiconductor Manufacturing (MASM 2002), Editors G. T. Mackulak, J. W.
Fowler, and A. Schoemig, Tempe, AZ, April 10-12, 2002. 200-205. |
| G. R. Bitran and R. Morabito, "An Overview of Tradeoff Curves in
Manufacturing Systems Design," Production & Operations Management,
Vol. 8, No. 1, 56-75, 1999. |
| G. R. Bitran and D. Sarkar, "Targeting Problems in Manufacturing
Queueing Networks-An Iterative Scheme and Convergence," European
Journal of Operations Research, Vol. 76, No. 3, 501-510, 1994. |
| G. R. Bitran and D. Tirupati, "Tradeoff Curves, Targeting and
Balancing in Manufacturing Queueing Networks," Operations Research,
Vol. 37, No. 4, 547-564, 1989. |
| N. K. Boots and H. Tijms, "A Multiserver Queueing System with
Impatient Customers," Management Science, Vol. 45, No. 3, 444-448,
1999. |
| F. Chance, "Conjectured Upper Bounds on Transient Mean Total Waiting
Times in Queuing Networks," Proceedings of the 1993 Winter Simulation
Conference, 1993. |
| F. Chance, "Delphi: A C-Based Queuing Network Simulator,"
Technical Report 1045, School of Operations Research and Industrial
Engineering, Cornell University, 1993. |
| H. Chen, M. Harrison, A. Mandelbaum, A. Van Ackere, and L. Wein,
"Empirical Evaluation of A Queueing Network Model for Semiconductor
Wafer Fabrication," Operations Research, Vol. 36, No. 2, 202-215, 1988. |
| M. Chen, R. Dubrawski, and S. Meyn, "Management of Demand-Driven
Production Systems," Working Paper, Department of Electrical and
Computer Engineering and the Coordinated Sciences Laboratory, University of
Illinois at Urbana-Champaign, Urbana, IL 61801. (Accepted for publication in
IEEE Trans. Auto. Control, 2004.)
Available in PDF from http://decision.csl.uiuc.edu/~meyn. |
| D. Connors, G. Feigin, and D. Yao, "A Queueing Network Model for
Semiconductor Manufacturing," IEEE Transactions on Semiconductor
Manufacturing, Vol. 9, No. 3, 412-427, 1996. |
| G. Curry, B. Peters, and M. Lee, "Incorporating Material Handling
into Queueing Network Models of Manufacturing Systems," Proceedings of
the International Conference on Modeling and Analysis of Semiconductor
Manufacturing (MASM 2002), Editors G. T. Mackulak, J. W. Fowler, and A.
Schoemig, Tempe, AZ, April 10-12, 2002. 188-193. |
| J. G. Dai, D. H. Yeh, and C. Zhou, "The Q-NET Method for Re-Entrant
Queueing Networks with Priority Disciplines," Operations Research, Vol.
45, No. 4, 610-623, 1997. |
| B. L. Deuermeyer, G. L. Curry, and R. M. Feldman, "An Automatic
Modeling Approach to the Strategic Analysis of Semiconductor Fabrication
Facilities," to appear in Production and Operations Management. |
| C. R. Glassey and S. Seshadri, "Transient Flow in Queueing Systems
via Closure Approximations," SRC Publication No. C92849, 1993. |
| J. M. Harrison and L. M. Wein, "Scheduling Networks of Queues. Heavy
Traffic Analysis of a Two-Station Closed Network," Operations Research,
Vol. 38, No. 6, 1052-1064, 1990. |
| J. J. Hasenbein, "Necessary Conditions for Global Stability of
Multiclass Queueing Networks," Operations Research Letters, Vol. 21,
No. 2, 87-94, 1997. |
| W. J. Hopp, M. L. Spearman, S. Chayet, K. L. Donohue, and E. S. Gel,
"Using an Optimized Queueing Network Model to Support Wafer Fab
Design," IIE Transactions, Vol. 34, No. 2, 119-130, 2002. |
| Y. F. Hung, and C. B. Chang, "Using an empirical Queueing Approach to
Predict Future Flow Times," Computers and Industrial Engineering, Vol.
37, No. 4, 809-821, 1999. |
| G. Inoue and K. Yoneda, "VLSI Production Analysis Using Queueing
Network Model," Proceedings of the Fifth Symposium on Automated
Integrated Circuits Manufacturing, Hollywood, FL, 33-44, 1989. |
| M. Jeng, X. Xie, and S.-L. Chung, "ERCN* Merged Nets for Modeling Degraded Behavior and Parallel Processes in Semiconductor Manufacturing Systems," IEEE Transactions on Systems, Man and Cybernetics, Part A, Vol. 34, No. 1, 102-112, 2004. |
| S. Kim, "Approximation of Multiclass Queueing Networks with Highly Variable Arrivals under Deterministic Routing," Naval Research Logistics, Vol. 52, No. 5, 399-408, 2005. |
| M. Kuroda and A. Kawada, "Adaptive Input Control for Job-Shop Type
Production Systems with Varying Demands using Inverse Queueing Network
Analysis," International Journal of Production Economics, Vol. 41, No.
1, 217-225, 1995. |
| M. Kuroda and A. Kawada, "Optimal Input Control for Job-Shop Type
Production Systems using Inverse Queueing Network Analysis,"
International Journal of Production Economics, Vol. 33, 215-223, 1994. |
| L. Louw and D. C. Page, "Queuing Network Analysis Approach for
Estimating the Sizes of the Time Buffers in Theory of Constraints-Controlled
Production Systems," International Journal of Production Research, Vol.
42, No. 6, 1207-1226, 2004. |
| S. Meyn, "Value Functions, Optimization, and Performance Evaluation
in Stochastic Network Models," Working Paper, Department of Electrical
and Computer Engineering and the Coordinated Sciences Laboratory, University
of Illinois at Urbana-Champaign, Urbana, IL 61801. Available for download
from http://decision.csl.uiuc.edu/~meyn. |
| J. Miltenburg, C. H. Cheng, and H. M. Yan, "Analysis of Wafer
Fabrication Facilities Using Four Variations of the Open Queueing Network
Decomposition Model," IIE Transactions, Vol. 34, No. 3, 263-272, 2002. |
| M. Mittler and N. Gerlich, "Reducing the Variance of Sojourn Times in
Queuing Networks with Overtaking," University of Wurzberg, Institute of
Computer Science, Report No. 73, 1993. |
| Brian D. Neureuther, "Estimating Cycle Time in Complex Job Shops," Journal Of Integrated Design And Process Science, Vol. 6, No. 3, 93-104, 2004. |
| W. Scholl, E. S. Gel, K. Khowala, and J. W. Fowler, "Use of
Analytical Queueing Approximations to Set Processing Step Performance
Targets at Infineon Technologies Dresden," Proceedings of the
International Conference on Modeling and Analysis of Semiconductor
Manufacturing (MASM 2002), Editors G. T. Mackulak, J. W. Fowler, and A.
Schoemig, Tempe, AZ, April 10-12, 2002. 206-210. |
| S. Seshadri and M. Pinedo, "Optimal Allocation Of Resources In A Job
Shop Environment," IIE Transactions, Vol. 31, No. 3, 195-206. |
| J. G. Shanthikumar and J. A. Buzacott, "The Time Spent in a Dynamic
Job Shop," European Journal of Operational Research," Vol. 17, No.
2, 215-226, 1984. |
| M. L. Spearman, "An Analytic Congestion Model for Closed Production
Systems with IFR Production Times," Management Science, Vol. 37, No. 8,
1015-1029, 1991. |
| C. Stacey, K. Pawlikowski, and D. McNickle, "Detection and
Significance of the Initial Transient Period in Quantitative Steady-State
Simulation," presented at the Australian Telecommunications Research
Seminar, 1993. |
| R. Suri, G. W. W. Diehl, S. D. Treville, and M. J. Tomsicek, "From
CAN-Q to MPX: Evolution of Queueing Software for Manufacturing,"
Interfaces, Vol. 25, No. 5, 128-150, 1995. |
| N. Vandaele, L. De Boeck, and D. Callewier, "An Open Queueing Network
for Lead Time Analysis," IIE Transactions, Vol. 34, No. 1, 1-9, 2002. |
| M. H. Veatch and L. W. Wein, "Monotone Control of Queueing and
Production/Inventory Systems," Working Paper No. OR-257-91, Operations
Research Center, Massachusetts Institute of Technology, 1991. |
| L. M. Wein, "Scheduling Networks of Queues: Heavy Traffic Analysis of
a Two-Station Network with Controllable Inputs," Operations Research,
Vol. 38, No. 6, 1065-1078, 1990. |
| W. Whitt, "Improving Service by Informing Customers About Anticipated
Delays," Management Science, Vol. 45, No. 2, 192-207, 1999. |
| W. Whitt, "Predicting Queueing Delays," Management Science, Vol.
45, No. 6, 870-888, 1999. |
| W. Whitt, "The Queueing Network Analyzer," The Bell System
Technical Journal, Vol. 62, No. 9, 2779-2814, 1983. |
| Chia-Wen Yang, Kuo-Sung Huang, Gary Yu, and Dong-Yeh Jan, "Using Queuing Theory to Estimate the Storage Space of Stocker in Automated Material Handling Systems," Proceedings of the 2002 Semiconductor Manufacturing Technology Conference, 25-28, 2002. The authors are from Macronix Int. Co. Ltd., Hsinchu, Taiwan. |
| E. Zahara and S.-K.S. Fan, "Real-Coded Genetic Algorithm for Stochastic Optimization: A Tool for Recipe Qualification of Semiconductor Manufacturing under Noisy Environments," International Journal of Advanced Manufacturing Technology, Vol. 25, No. 3-4, 361-369 2005. |
|
